C
ONFIGURING
THE
S
WITCH
2-112
Web – Click SNMP, SNMP IP Filtering. To add an IP address, type
the new IP address in the IP Address box, type the appropriate
subnet mask in the Subnet Mask box, and then click “Add IP
Filtering Entry.” To delete an IP address, click the entry in the IP
Filter List, and then click “Remove IP Filtering Entry.”
CLI – The following is an example of configuring an SNMP IP
filter.
Console(config)#snmp ip filter 10.1.2.3 255.255.255.255 3-70
Console(config)#
b_mgmt.book Page 112 Tuesday, July 8, 2003 5:24 PM
To Next Page
Loading...
