SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart - Page 148

C ONFIGURING THE S WITCH
2-116
Web – Click IGMP, IGMP Configuration. Adjust the IGMP settings
as required, and then click Apply. (The default settings are shown
below.)
CLI – This example modifies the settings for multicast filtering, and
then displays the current status.
Console(config)#ip igmp snooping 3-149
Console(config)#ip igmp snooping querier 3-153
Console(config)#ip igmp snooping query-count 10 3-154
Console(config)#ip igmp snooping query-interval 100 3-155
Console(config)#ip igmp snooping query-max-response-time 20 3-156
Console(config)#ip igmp snooping router-port-expire-time 300 3-157
Console(config)#ip igmp snooping version 2 3-151
Console(config)#exit
Console#show ip igmp snooping 3-152
Igmp Snooping Configuration
----------------------------------------------
Service status : Enabled
Querier status : Enabled
Query count : 10
Query interval : 100 sec
Query max response time : 20 sec
Query time-out : 300 sec
IGMP snooping version : Version 2
Console#
b_mgmt.book Page 116 Tuesday, July 8, 2003 5:24 PM