iv
ABOUT THIS GUIDE
This guide is your introduction to building parts using a Fortus 3D Production System. It is
designed as a learning and reference tool that explains system operation in an easy to
understand, step-by-step process.
HOW TO USE THIS GUIDE
This guide is divided into easy-to-follow chapters. The tabs allow you to quickly and easily find
the information you want. You can read this user guide chapter by chapter or use the tabs, and
Table of Contents you need to quickly find specific information. Keeping this user guide close to
your system will efficiently allow you to troubleshoot and maintain the system.
CONVENTIONS USED IN THIS GUIDE
The following conventions are used in this guide.
• If you see text in bol
d it indicates that this is a key located on the Operator Touchscreen. If you
see boxed blue text, it indicates that this information is being shown on the Operator Panel
Screen.
• The >
character is used to separate items within a navigational path. For example, navigate to File >
Open from the Main Menu.
• Icons that are grayed out on the Operator Touchscreen are not active.
REVISION LOG
Revision Date Description of Changes
402737-0001_REV_A November 2016 First release of this document.
402737-0001_REV_B May 2017 Combined Gen 1 and Gen 2 User Guides
402737-0001_REV_C May 2018 F900 release
402737-0001_REV_D November 2018 Added Antero material information and MT Connect
i
n
structions
402737-0001_REV_E December 2018 Updated Tip Life Table
402737-0001_REV_F February 2020 Added Antero ESD tip life information
To Next Page
Loading...
