iii
ABOUT THE F900
Welcome to the F900. This systems incorporate the latest in innovative technologies that
produce accurate and functional parts. Stratasys’ Fused Deposition Modeling
®
(FDM)
technology provides prototype parts, including internal features, that can be used to field-test
form, fit, and function.
COMPONENTS OF THE F900
• Insight™ Software Package
• A generic computer workstation (not sold by Stratasys)
•
The F900 System
•
Modeling Material
•
Support Material
SYSTEM HIGHLIGHTS
• The vacuum platen is adapted for use with two build sheet sizes:
• The small sheet is 16 in. (40.6 cm) X 18.5 in. (47.0 cm) X 0.02 in. (0.05 cm) thick.
•
The large sheet is 26 in. (66.0 cm) X 38 in. (96.5 cm) X 0.02 in. (0.05 cm) thick.
•
Envelope Size: 36 in. (91.4 cm) wide X 36 in. high (91.4 cm) X 24 in. (60.96 cm) deep.
•
Material Bays: 2 model, 2 support
•
Slice Heights:
Note: Max part build will be limited to 35.5 inches in Z (high), for parts built with
Nylon 12CF due to thermoplastic shrink constraints.
Model Tip Slice Height (in) Slice Height (mm)
T12 0.007 0.178
T14 0.010 0.254
T16, T16A 0.010 0.254
T20 0.013 0.330
T20B 0.013 0.330
T20C 0.010 0.254
T40 0.020 0.508
Note: Material choice affects available size/slice height.
To Next Page
Loading...
