Suzuki GSF1250 - Page 125

Engine General Information and Diagnosis: 1A-56
P1750-L for IAP sensor No.2 (Use of SDS)
Step Action Yes No
1 1) Click the data monitor button (1).
2) Check the manifold absolute pressure 2 data.
Approx. 0 kPa (0 kgf/cm
3
, 0 psi) and less OK?
Go to Step 2. Go to Step 4.
2 1) Turn the ignition switch OFF.
2) Check the IAP sensor (No.2) coupler for loose or poor
contacts.
If OK, then check the IAP sensor (No.2) lead wire
continuity.
Go to Step 3. R and G/B wire open,
W/Bl wire shorted to the
ground.
1
I718H1110251-01
I718H1110183-02
I718H1110168-03