2B-9 Front Suspension:
• Install the front fork cap (1).
NOTE
Before installing the front fork cap, turn the
inner rod lock-nut (2) completely to the lower
position as shown.
• Tighten the lock-nut (2) to the specified torque.
Tightening torque
Inner rod lock-nut (a): 20 N·m (2.0 kgf-m, 14.5 lb-
ft)
• Apply fork oil lightly to the O-ring (3).
CAUTION
!
Use a new O-ring (3) to prevent oil leakage.
: Oil 99000–99001–SS8 (SUZUKI FORK OIL
SS-08 or equivalent)
• Install the front fork protector (4).
NOTE
Fit the projection of the front fork protector to
the depression of the front fork outer tube.
Front Fork Parts Inspection
B718H12206005
Refer to “Front Fork Disassembly and Assembly
(Page 2B-4)”.
Inner and Outer Tubes
Inspect the inner tube sliding surface and outer tube
sliding surface for scuffing.
1
(a)
2
I718H1220013-01
3
I718H1220016-01
4
I649G1220034-02
I649G1220035-03
To Next Page
Loading...
