Suzuki GSF1250 - Horn Removal and Installation

9C-11 Combination Meter / Fuel Meter / Horn:
3) Inspect the horn button for continuity with a tester.
If any abnormality is found, replace the left
handlebar switch assembly with a new one.
Refer to “Handlebar Removal and Installation in
Section 6B (Page 6B-3)”.
Special tool
: 09900–25008 (Multi-circuit tester set)
Tester knob indication
Continuity ( )
Horn Inspection
1) Disconnect the horn couplers (1).
2) Connect a 12 V battery to terminal “A” and terminal
“B”. If the sound is not heard from the horn, replace
the horn with a new one.
3) Connect the horn coupler.
Horn Removal and Installation
B718H19306028
Removal
1) Disconnect the horn couplers (1).
2) Remove the horn (2) by removing the mounting bolt.
Installation
Install the horn in the reverse order of removal.
I718H1930028-03
1
I718H1930030-01
“A”
“B”
I718H1930040-02
1
2
I718H1930031-03