Suzuki GSF1250 Service Manual

4E-69 ABS:
DTC “61” (C1661): ABS Solenoid Malfunction
B718H14504018
Troubleshooting
Possible Cause
Faulty solenoid valve or relay
Step Action Yes No
1 1) Turn the ignition switch OFF.
2) Remove the seat. Refer to “Exterior Parts Removal and
Installation in Section 9D (Page 9D-6)”.
3) Inspect the ABS solenoid valve fuse.
CAUTION
!
If a fuse is blown, find the cause of the problem
and correct it before replacing the fuse.
ABS solenoid valve fuse
15 A
Is the ABS solenoid valve fuse OK?
Go to Step 2. Replace the ABS
solenoid valve fuse.
I718H1450127-01

Suzuki GSF1250 Specifications

General

Displacement	1255 cc
Bore x Stroke	79.0 mm x 64.0 mm
Compression Ratio	10.5:1
Fuel System	Fuel injection
Transmission	6-speed, constant mesh
Front Suspension	Telescopic, coil spring, oil damped
Rear Suspension	Link type, coil spring, oil damped
Front Brakes	Dual hydraulic disc
Rear Brakes	Single hydraulic disc
Front Tire	120/70ZR17M/C (58W), tubeless
Rear Tire	180/55ZR17M/C (73W), tubeless
Overall Length	2130 mm
Overall Width	790 mm
Seat Height	805 mm
Wheelbase	1485 mm
Fuel Tank Capacity	19.0 L
Starter	Electric
Final Drive	Chain
Ignition	Electronic ignition (transistorized)
Engine Type	4-stroke, liquid-cooled, DOHC
Ground Clearance	135 mm