Suzuki GSF1250 - Specifications; Service Data; Tightening Torque Specifications; Special Tools and Equipment

1B-10 Emission Control Devices:
Specifications
Service Data
B718H11207001
FI sensors
Tightening Torque Specifications
B718H11207002
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque Specifications in Section
0C (Page 0C-7)”.
Special Tools and Equipment
Recommended Service Material
B718H11208001
Special Tool
B718H11208002
Item Specification Note
HO2 sensor resistance Approx. 8 Ω at 23 °C (73 F°)
HO2 sensor output voltage
0.3 V and less at idle speed
0.6 V and more at 3 000 r/min
PAIR control solenoid valve resistance 18 – 22 Ω at 20 – 30 °C (68 – 86 °F)
Fastening part
Tightening torque
Note
N⋅mkgf-mlb-ft
HO2 sensor 25 2.5 18.0 )(Page 1B-5)
PAIR reed valve cover bolt 11 1.1 8.0 )(Page 1B-6)
Material SUZUKI recommended product or Specification Note
Sealant SUZUKI BOND No.1215 or
equivalent
P/No.: 99000–31110 )(Page 1B-9)
Thread lock cement THREAD LOCK CEMENT SUPER
1322 or equivalent
P/No.: 99000–32110 )(Page 1B-6)
09900–25008
Multi-circuit tester set
)(Page 1B-8)