Engine General Information and Diagnosis: 1A-64
P0110-L (Use of SDS)
Step Action Yes No
1 1) Click the data monitor button (1).
2) Check the intake air temperature data.
Approx. 125
°
C (257
°
F) and more OK?
Go to Step 2. Go to Step 3.
2 1) Turn the ignition switch OFF.
2) Check the IAT sensor coupler for loose or poor contacts.
If OK, then check the IAT sensor lead wire continuity.
3) Disconnect the IAT sensor coupler.
Go to Step 3. • Dg wire shorted to
the ground.
• If wire is OK, go to
Step 3.
1
I718H1110251-01
I718H1110185-02
I718H1110168-03
To Next Page
Loading...
