Engine General Information and Diagnosis: 1A-94
ACTIVE CONTROL INSPECTION (ISC RPM CONTROL)
Check 1
1) Set up the SDS tool. (Refer to the SDS operation manual for further details.)
2) Check that the engine is running.
3) Click the “Active control”.
4) Click the “ISC rpm control” (1).
5) Check that the “Spec” (2) is idle speed 1 200 ± 100 rpm.
6) Check that the “Desired idle speed” (3) is within the specified idle rpm.
1
I718H1110246-01
2
I718H1110213-01
3
I718H1110214-02
To Next Page
Loading...
