Suzuki GSF1250 - Page 259

Engine Mechanical: 1D-57
Oil Pressure Regulator / Oil Strainer
1) Remove the oil pressure regulator (1).
2) Remove the oil strainer (2).
3) Remove the O-rings (3).
Crank Balancer
1) Remove the plate (1).
2) Remove the balancer shaft arm (2).
3) Draw out the balancer shaft (3) and remove the
crank balancer assembly (4).
NOTE
Disassemble the crank balancer assembly if
necessary. Refer to “Crank Balancer
Disassembly and Assembly (Page 1D-72)”.
Crankcase
1) Remove the crankcase bolts (M6).
2) Remove the crankcase bolts (M8).
1
2
3
I718H1140175-01
1
I718H1140176-01
2
I718H1140177-02
3
4
I718H1140178-01
I718H1140179-01
I718H1140180-02