1D-60 Engine Mechanical:
NOTE
• Do not remove the crankshaft journal
bearings unless absolutely necessary.
• Make a note of where the crankshaft
journal bearings are removed from so that
they can be reinstalled in their original
positions.
Oil Gallery Plug
1) Remove the oil gallery plug (1) from the upper
crankcase.
2) Remove the oil gallery plugs (2) from the lower
crankcase.
3) Remove the oil gallery plug (3) from the oil pan.
Oil seal /Bearing
Remove the oil seals and bearings if necessary. Refer to
“Transmission Removal in Section 5B (Page 5B-3)” and
“Gearshift Shaft Oil Seal / Bearing Removal and
Installation in Section 5B (Page 5B-19)”.
I718H1140192-01
I718H1140193-01
1
I718H1140194-01
2
2
I718H1140195-01
3
I718H1140196-01
I718H1140197-01
I718H1140198-01
To Next Page
Loading...
