Suzuki GSF1250 - Page 336

1G-13 Fuel System:
5) Remove the cup cover (6) and fuel pump (7) from
the reservoir cup.
6) Remove the fuel pressure regulator assembly (8).
7) Remove the joint (9).
CAUTION
!
Never remove the fuel pressure regulator (10)
from the holder.
8) Disconnect the lead wire (BI) (11) and remove the
fuel level gauge coupler (12).
9) Disconnect the lead wire (W) (13) and remove the
thermistor (14).
Assembly
Refer to “Fuel Mesh Filter Inspection and Cleaning
(Page 1G-14)”.
Assemble the fuel tank pump in the reverse order of the
disassembly. Pay attention to the following points:
CAUTION
!
• To prevent fuel leakage, each O-ring must
be replaced with a new one.
• Apply engine oil lightly to each of the O-
rings.
6
7
I718H1170032-02
8
I718H1170033-02
9
10
I718H1170034-02
12
11
I718H1170036-03
13
14
I718H1170035-02