Maintenance and Lubrication: 0B-4
Exhaust Pipe Bolt and Muffler Bolt Inspection
B718H10206005
Tighten exhaust pipe bolts, muffler bolt and nut
Initially at 1 000 km (600 miles, 2 months) and every
12 000 km (7 500 miles, 24 months) thereafter.
Check the exhaust pipe bolts, muffler bolts and nut to the
specified torque.
Tightening torque
Exhaust pipe bolt (a): 23 N·m (2.3 kgf-m, 16.5 lb-ft)
Exhaust pipe mounting bolt (b): 23 N·m (2.3 kgf-m,
16.5 lb-ft)
Muffler connecting bolt (c): 23 N·m (2.3 kgf-m, 16.5
lb-ft)
Muffler mounting bolt (d): 26 N·m (2.6 kgf-m, 19.0
lb-ft)
Spark Plug Replacement
B718H10206003
Replace spark plug
Every 12 000 km (7 500 miles, 24 months)
Refer to “Ignition Coil / Plug Cap and Spark Plug
Removal and Installation in Section 1H (Page 1H-4)”.
Spark Plug Inspection and Cleaning
B718H10206004
Inspect spark plug
Every 6 000 km (4 000 miles, 12 months)
Heat Range
1) Remove the spark plugs. Refer to “Ignition Coil /
Plug Cap and Spark Plug Removal and Installation in
Section 1H (Page 1H-4)”.
2) Check spark plug heat range by observing electrode
color.
If it appears white or glazed, replace the spark plug
with colder type one.
Heat range
3) After finishing the spark plug inspection, reinstall the
removed parts.
Carbon Deposits
1) Remove the spark plugs. Refer to “Ignition Coil /
Plug Cap and Spark Plug Removal and Installation in
Section 1H (Page 1H-4)”.
2) Check carbon deposits on the spark plug.
If carbon is deposited, remove it using a spark plug
cleaner machine or carefully use a tool with a
pointed end.
3) After finishing the spark plug inspection, reinstall the
removed parts.
(d)
(b)
(a)
(c)
I718H1020007-04
Standard Cold type Hot type
NGK CR7E CR8E CR6E
DENSO U22ESR-N U24ESR-N U20ESR-N
I649G1020010-02
To Next Page
Loading...
