Suzuki GSF1250 - Page 503

ABS: 4E-10
GSF1250SA
1
2
3
5
7
6
“A”
“B”
“E”
“I”
“G”
4
“C”
“D”
“F”
“H”
8
I718H1450023-03
1. Clamp 7: Clamp
: Clamp the sensor lead wire at the white marking.
“E”: Clamp the sensor lead wire sleeve with the brake
hose.
2. Guide 8. Front wheel speed sensor “F”: Pass through the sensor lead wire outside of the
brake hose union bolt.
3. Front brake hose No.1 “A”: Outside mark “G”: Clamp the sensor lead wire at front side of the
brake hose. Make clearance from the front fender.
4. Front brake hose No.1 (L) “B”: Pass through the sensor lead wire between brake
hose No.2 and brake hose No.2 (L).
“H”: Clamp the sensor lead wire on the protector of
brake hose.
5. Front brake hose No.2 “C”: Pass through the sensor lead wire in front of the
brake hose.
“I”: Clamp the sensor lead wire at front side of the
brake hose.
6. Front brake hose No.2 (L) “D”: Pass through the sensor lead wire outside of the
brake hose.