Suzuki GSF1250 - Motorcycle Cleaning and Storage Procedure; Motorcycle Cleaning Instructions; Storage Preparation and Procedures

0B-21 Maintenance and Lubrication:
Chassis Bolt and Nut Inspection
B718H10206028
Tighten chassis bolt and nut
Initially at 1 000 km (600 miles, 2 months) and every
6 000 km (4 000 miles, 12 months) thereafter.
Check that all chassis bolts and nuts are tightened to
their specified torque.
1. Frame down tube
: 50 N⋅m (5.0 kgf-m, 36.0 lb-ft)
2. Steering stem head nut
3. Handlebar holder bolt
: 65 N⋅m (6.5 kgf-m, 47.0 lb-ft)
: 23 N⋅m (2.3 kgf-m, 16.5 lb-ft)
4. Front fork upper clamp bolt
5. Handlebar holder set nut
: 23 N⋅m (2.3 kgf-m, 16.5 lb-ft)
: 45 N⋅m (4.5 kgf-m, 32.5 lb-ft)
(a)
1
(a)
1
(a)
1
I718H1020052-01
(c)
3
(c)
3
(b)
2
I718H1020053-01
(d)
5
(c)
4
I718H1020054-02
6. Front brake master cylinder mounting bolt
7. Brake hose union bolt
: 23 N⋅m (2.3 kgf-m, 16.5 lb-ft)
: 10 N⋅m (1.0 kgf-m, 7.0 lb-ft)
8. Rear shock absorber mounting nut (Upper)
9. Cushion rod mounting nut
: 50 N⋅m (5.0 kgf-m, 36.0 lb-ft)
: 78 N⋅m (7.8 kgf-m, 56.5 lb-ft)
10. Rear shock absorber mounting nut (Lower)
11. Cushion lever mounting nut
12. Cushion rod mounting nut
: 50 N⋅m (5.0 kgf-m, 36.0 lb-ft)
: 78 N⋅m (7.8 kgf-m, 56.5 lb-ft)
(e)
6
(c)
7
I718H1020055-02
(a)
8
(f)
9
I718H1020056-01
(f)
11
(f)
12
10
(a)
I718H1020057-01