9B-4 Lighting Systems:
6) Reassemble the headlight.
7) Install the headlight assembly so that the hook “A” on
the headlight bezel engages with “B” of the housing.
GSF1250S/SA
1) Remove the combination meter assembly. Refer to
“Combination Meter Removal and Installation in
Section 9C (Page 9C-4)”.
2) Remove the position light sockets (1) and replace
the position light bulbs.
3) Disconnect the headlight (Low beam) coupler (2)
and remove the bulb socket rubber cap (3).
4) Remove the headlight bulb/socket (Low beam) (4)
by unhooking the bulb holder spring (5).
5) Disconnect the headlight bulb (7) from the socket
(6).
6) Replace the headlight bulb with a new one.
7) Replace the headlight bulb (High beam) in the same
way as that of the low beam one.
8) Reinstall the removed parts.
“A”
“B”
I718H1920017-03
1
I718H1920009-01
3
2
I718H1920010-02
5
4
I718H1920011-02
6
7
I718H1920049-02
I718H1920012-01
To Next Page
Loading...
