1A-19 Engine General Information and Diagnosis:
In the LCD (DISPLAY) panel, the malfunction code is indicated from small code to large code.
C26 (P0353)
)(Page 1A-73)
Ignition signal #3 (IG coil #3) For #3 cylinder
C27 (P0354)
)(Page 1A-73)
Ignition signal #4 (IG coil #4) For #4 cylinder
C28 (P1655)
)(Page 1A-73)
Secondary throttle valve actuator (STVA)
C29 (P1654-H/L)
)(Page 1A-77)
Secondary throttle position sensor (STPS)
C31 (P0705)
)(Page 1A-85)
Gear position signal (GP switch)
C32 (P0201)
)(Page 1A-87)
Injector signal #1 (FI #1) For #1 cylinder
C33 (P0202)
)(Page 1A-87)
Injector signal #2 (FI #2) For #2 cylinder
C34 (P0203)
)(Page 1A-87)
Injector signal #3 (FI #3) For #3 cylinder
C35 (P0204)
)(Page 1A-87)
Injector signal #4 (FI #4) For #4 cylinder
C40 (P0505/P0506/
P0507)
)(Page 1A-91)
Idle speed control valve (ISC valve)
C41 (P0230-H/L,
P2505)
)(Page 1A-97) /
)(Page 1A-100)
Fuel pump control system (FP control system),
ECM/PCM power input signal
Fuel pump, Fuel pump relay
C42 (P1650)
)(Page 1A-102)
Ignition switch signal (IG switch signal) Anti-theft
C44 (P0130,
P0135)
)(Page 1A-102)
Heated oxygen sensor (HO2S)
C49 (P1656)
)(Page 1A-108)
PAIR control solenoid valve
C60 (P0480)
)(Page 1A-111)
Cooling fan control system Cooling fan relay
C62 (P0443) EVAP system purge control valve (E-33 only)
Code Malfunction Part Remarks
To Next Page
Loading...
