Svantek SV 977D User Manual

161
SV 977D User Manual
Noise Mar.
Margin value to the calculated noise level for RT60
calculations: 0 ÷ 20 dB.
Chapter
12.2
Appendix E
Logger Name
Name of the Logger file in which data of the RT60
analysis will be recorded.
Chapter
12.2
Level
Threshold level of the sound source for triggering the
RT60 measurement. If the measured sound is below the
Level value, the RT60 measurement will not start.
Chapter
12.2
Appendix E
Tonality
Screen that enables setting the tonality measurement
parameters: Standard, Mode, Number of Meas. and
Directory.
Chapter
14.2
Appendix F
Standard
Standard according to which tones will be defined:
ISO 20065-16, ISO 226-2003 or ISO 226-1987.
Chapter
14.2
Appendix F
Mode
Measurement mode for the ISO 20065-16 standard:
Auto or Manual.
In the Auto mode, the measurements are performed one
by one without pauses after pressing the <Start> key,
until the number of measurements reaches the Number
of Meas. value.
In the Manual mode, the measurements are performed
one by one by the user pressing the <Start> key.
Chapter
14.2
Appendix F
Number of Meas.
Maximum number of measurements.
Chapter
14.2
Appendix F
Directory
Directory for saving measurement files.
Chapter
14.2
Appendix F
STIPA Settings
Screen that enables setting the STIPA parameters:
Project, Area, Source, Averaging, Standard,
Measurement Unit, and Source Calibration.
Chapter
13.4.4

Svantek SV 977D Specifications

General

Brand	Svantek
Model	SV 977D
Category	Measuring Instruments
Language	English