SYSMEX XE-5000 - Page 163

CHAPTER 9 Cleaning and Maintenance
Sysmex XE-5000 Instructions for Use 9-35
Revised April 2007 EU
LP printout
The reagent replacement log can be printed out using a
Ledger printer.
From the reagent replacement log screen, select “Ledger
(LP)” on the “Report (P)” menu to print.
Output data in csv file format
Reagent replacement log can be output in a csv file format.
1. Select “CSV File Output” on the “Record (R)” menu of
the reagent replacement log screen.
2. The file save dialog box will appear.
3. Designate the place to save the file.
Manually enter the name to save the file if the file name
should be changed.
4. Click on “Save (S)” to save the reagent replacement
record in csv format.
Click “Cancel” to cancel the save operation.
Note:
The contents to be printed are linked with the filter. If a
comment has been entered, it is printed on the
following line.
Information
The system uses C:\ drive.
It is recommended to save files to the D:\ drive or to a
USB Memory Stick. When C:\ drive (system drive)
storage capacity is reaching the limit, the operating
system may become unstable.
Note:
The csv file is a type of data format in which a series
of data is enumerated by separating them using a
comma (,). A csv files data can be retrieved using
spreadsheet software commercially available
supporting csv file format.