SYSMEX XE-5000 - 9.23 XE-5000 maintenance and inspection check list

CHAPTER 9 Cleaning and Maintenance
9-52 Sysmex XE-5000 Instructions for Use
Revised April 2007 EU
9.23 XE-5000 maintenance and inspection check list
1234567
89
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Execute shutdown
Check Trap Chamber Fluid Level
AS NEEDED MAINTENANCE:
SAMPLE ROTOR VALVE MAINTENANCE:
DAILY MAINTENANCE:
Initial:
Daily:
Date/Int. Date/Int.
Date/Int. Date/Int.
Procedure: Clean manual rinse cup Clean sample rotor valve tray Clean piercer tray Remove clogs (Clog removal sequence) Clean IMI detector aperture Clean RBC detector aperture
Remove flow cell air bubbles in optical detector block Clean flow cell in the optical detector block Replace waste container
Procedure: Clean sample rotor valve
REPLACEMENTS:
Date/Int. Date/Int.
Procedure: Replace reagents Replace piercer Replace hand clipper Replace rubber plate No. 39 Replace fuses Replace HEPA filter
Month Year