CHAPTER 2 Safety Information
Sysmex XE-5000 Instructions for Use 2-5
Revised July 2007
2.7 Quality control materials
2.8 Laser
Caution!
• Do not inject or ingest.
• Follow directions on control material package insert.
• Avoid letting the control material come in contact with
dust, dirt or bacteria.
• Control material must not be used after their
expiration date.
• Take care not to spill control material. If spilled, follow
your laboratory's prescribed cleaning and
decontamination procedures.
Warning!
The XE-5000 contains the semiconductor laser unit.
This semiconductor laser unit is shielded with the
shield box cover, and is provided with an interlock
system that prevents laser from oscillation if the cover
is removed. Do not open this cover. Otherwise, the
laser beam can damage your eyes.
Laser Diode
NOTE: This caution label is located
inside the Laser Unit Cover.
To Next Page
Loading...
