CHAPTER 9 Cleaning and Maintenance
Sysmex XE-5000 Instructions for Use 9-19
Revised April 2007 EU
9.13 Replacing and registering reagents
When the reagent runs out during analysis, the instrument
stops automatically and an error message shown below is
displayed on the screen. Replace the specified reagent with
new one. Then, execute the reagent aspiration on the
Reagent setting screen.
Displaying the reagent setting screen
The Reagent setting screen is displayed by either of the
processes described below.
• Select “Reagent” on the function menu of the Main Menu
screen.
• When a reagent replacement error message is displayed,
press the HELP key, and select “OK” on the function menu
of the Help screen.
Reagent setting screen display
(Numbers): Displays numbers 1–9.
A reagent can be selected by pressing the
corresponding number key to move the cursor to
that reagent.
Reag: Displays the reagent names.
Replace: “Replace” appears in this column if the reagent
has been designated as a replacement. If the
reagent has not been designated as a
replacement, nothing appears in this column.
If reagent information has been entered
manually or by barcode, that reagent will be
designated as a replacement automatically, and
the cursor will move to that reagent.
Lot No.: Displays the current lot number.
Error Message New Reagent
Replace Container EPK CELLPACK
Replace Container ESE CELLSHEATH
Replace Container FBA STROMATOLYSER-FB
Replace Container FFD STROMATOLYSER-4DL
Replace Container FFS STROMATOLYSER-4DS
Replace Container SNR
STROMATOLYSER-NR (L)
STROMATOLYSER-NR (S)
Replace Container RED RET SEARCH (II) (Diluent, dye
solution)
Replace Container SLS SULFOLYSER
Replace Container SIM STROMATOLYSER-IM
Next No.1
Replace EPK
DP No.
Num
DP
Xm
C D N R
Manual Replace
<Reagent setting>
Reag Replace Lot No. Exp.Date Amount
1
2
3
4
5
6
7
8
9
EPK
ESE
SLS
FBA
FFD
FFS
SIM
SNR
RED
A0029
ZA0005
ZA0006
ZA0007
ZA0008
ZA0009
ZA0011
ZA0015
ZA0016
2001/10/06
2001/11/10
2001/12/10
2001/11/15
2001/11/09
2001/12/23
2001/11/11
2001/11/01
2001/11/20
18L
4.6L
5.0L
5.0L
5.0L
42mL
5.0L
3.6L
1.0L
Replace
Manual
Not Ready
Execute Cancel