CHAPTER 6 Operation
Sysmex XE-5000 Instructions for Use 6-25
Revised April 2007
11. When the READY LED is lit, remove the remaining rack in
the analysis line, prepare the next samples, and repeat
the steps 8-10.
6.21 Display analysis results
The analysis results – numeral information of latest samples -
can be displayed on the Main Menu screen of the Main Unit
LCD.
The Main Menu screen is made up of five pages that can be
switched using and keys.
Caution!
Do not touch or remove the cover of the CP Unit
during sampler analysis.
You could be injured by the mechanical parts.
(If the cover is opened, analysis will be interrupted by
the monitoring switch.)
Information
If a message calling for reagent replacement is
displayed during analysis, replace with new reagent. If
the replace reagent sequence is executed when
reagent amount is insufficient, bubbles may occur,
resulting in higher background value.
Caution!
• The Positive/Negative display is intended for use only
in the clinical laboratory and are not for patient
diagnosis.
• POSITIVE or ERROR judgments indicate the
possibility of sample abnormality. Such results
should be reviewed carefully and may require further
examination in accordance with the protocol of your
laboratory.
Next No.123456789012346
DP No. 123456789012345
RBC 3.41 x10^6/uL
HGB 9.9 g/dL
HCT 31.3 %
MCV 91.8 fL
MCH 29.0 pg
MCHC 31.6 g/dL
PLT 191 x10^3/uL
RET% 38.7 %
RET# 0.1320 x10^6/uL
NRBC 1.29 x10^3/uL
WBC & 14.08 x10^3/uL
NEUT 10.37 73.6 %
LYMPH 2.19 15.6 %
MONO 1.38 9.8 %
EO 0.03 0.2 %
BASO 0.11 0.8 %
IG 0.05 0.6 %
HPC x10^3/uL
C D N R
POS ERR
PNo. 123456789012345 123456-01
Num
DP
Xm
Manual
Ready
QC AutoRinse Maint Reagent
To Next Page
Loading...
