SYSMEX XE-5000 - Alarm Sound; Operator Checks

CHAPTER 6 Operation
6-6 Sysmex XE-5000 Instructions for Use
Revised April 2007
6.5 Alarm sound
In the XE-5000, three types of alarm sounds are used to alert
the operator:
Key Entry Alarm (single beep)
Sounds about 0.1 second when a key is pressed on the panel
keypad.
Input Error Alarm (short beep)
Sounds about 1 second when a wrong key is pressed on the
panel keypad.
Analysis Error Alarm (long beep)
Sounds when an error occurs in the Main Unit and continues
until the C key or HELP key is pressed on the panel keypad.
6.6 Operator checks
1. Reagent check
Make sure that there is a sufficient amount of reagent for the
day’s samples. If the amount is insufficient, prepare
replacement reagent. If reagent runs out during an analysis,
the system automatically stops and alerts the operator to
replace the insufficient reagent. Analysis cannot be restarted
until replacement is completed. The following shows the
approximate number of cycles that can be analyzed per
container of reagent.
Setting Date Format
Auto Validate
Auto Output
Discrete
Analysis Ordering
User Administration
Host (HC) Setting
Report (GP) Setting
Ledger (LP) Setting
Categories
Reference Interval
Units
Reference Limit
CSV Output Setting
Backup
Starts Setting/System.
Starts Setting/Auto Validate.
Starts Setting/Auto Output.
Starts Setting/Discrete.
Starts Setting/Analysis Ordering.
Starts Setting/User Administration.
Starts Setting/Host (HC) Setting.
Starts Setting/Report (GP) Setting.
Starts Setting/Ledger (LP) Setting.
Starts Setting/Categories.
Starts Setting/Reference Interval.
Starts Setting/Item Attributes.
Starts Setting/Sampler Stop Limit Setting.
Starts Setting/CSV Output Setting.
Starts Setting/Backup.
Window Cascade
Tile
Split
Displays the presently displayed windows cascade style.
Displays parallels in above and below, left and right.
Splits window display.
Help About XE-5000 Displays the application version. (To version display dialog box.)
Menu Submenu Menu Function