SYSMEX XE-5000 - Supplies and Replacement Parts

CHAPTER 9 Cleaning and Maintenance
Sysmex XE-5000 Instructions for Use 9-51
Revised April 2007 EU
4. Check that the pressure displayed on the Sensor 1 screen
is the predetermined pressure.
5. If the displayed pressure does not match the
predetermined pressure, adjust it by repeating the
operations 3 and 4.
6. When the adjustment is completed, tighten the locking nut
while taking care not to allow the adjustment knob to
rotate.
9.22 Supplies and replacement parts
Reagents list
Replacements list
Part Number Description Volume
884-0871-1 CELLPACK (PK-30L) 20 L
834-0032-4 CELLSHEATH (SE-90L) 20 L
944-0461-3 STROMATOLYSER-FB (FBA-200A) 5 L
984-1771-2 STROMATOLYSER-4DL (FFD-200A) 5 L
984-1721-6 STROMATOLYSER-4DS (FFS-800A) 3 × 42 mL
064-2881-5 STROMATOLYSER-NR (L) (SNR-210A) lyse 3.6 L
064-2891-2 STROMATOLYSER-NR (S) (SNR-810A) dye 43 mL
904-1151-1 SULFOLYSER (SLS-220A) 5 L
934-0671-6 STROMATOLYSER-IM (SIM-220A) 10 L
984-1621-1 RET SEARCH (II) (RED-700A)
diluent 1 L
dye 12 mL
834-0162-1 CELLCLEAN (CL-50) 50 mL
Part Number Description Refer to
971-0583-5 PIERCER SET NO. 1 (XE/STANDARD) Chapter 9: 9.16
366-1792-2 TUBE HOLDER NO. 56 (WHITE) Chapter 6: 6.16
366-1789-1 TUBE HOLDER NO. 58 (WHITE) Chapter 6: 6.16
073-2763-1 SAMPLE RACK PACKAGE ASSEMBLY (WHITE) (6/PACK) Chapter 6: 6.16
923-8101-4 HAND CLIPPER S#4 ASSY (C1/PIER) Chapter 9: 9.17
368-0079-6 RUBBER PLATE NO. 39 Chapter 9: 9.18
266-5106-0 FUSE 250V 6.3A ST4-6.3A-N1 (N.AMERICA) Chapter 9: 9.19
266-7651-2 FUSE 250V 4A 313004 (N.AMERICA) Chapter 9: 9.19
266-5293-0 FUSE 250V 3.15A NO. 19195 (EUROPE) Chapter 9: 9.19
443-2224-6 HEPA FILTER (WITH PRE) Chapter 9: 9.20
462-3520-5 TRANSDUCER BRUSH Chapter 9: 9.8
Chapter 9: 9.9
983-8861-9 FLOAT SWITCH NO. 25 ASSY (C1/5L) Chapter 9: 9.13