SYSMEX XE-5000 - Page 182

CHAPTER 10 Troubleshooting
10-2 Sysmex XE-5000 Instructions for Use
Revised April 2007
2. Double-click the “Error log” icon on the Controller menu.
The Error Log screen appears.
Deleting error log
Error log can be deleted.
1. From the Error Log screen, select a record to delete by
clicking on it.
2. From “Record (R)”on the menu bar, select “Delete (D)”,
or click on the “Delete” button on the tool bar.
3. The Confirm Delete dialog box will be displayed.
4. Click “OK” to delete the selected record and close the
dialog box.
Click “Cancel” to cancel deletion.
Note:
Multiple error logs cannot be selected nor deleted at a
time.