SYSMEX XE-5000 - Page 22

CHAPTER 2 Safety Information
2-10 Sysmex XE-5000 Instructions for Use
Revised April 2007
Sampler
(1)
Pneumatic Unit - Front View
(1)
(2)
(1)
Do not push in the rack by hand.
There is a small risk that such handling could cause a mismatch between
sample numbers and analysis results.
Precautions on setting the
sampler
1. Check that the sample tubes fit
smoothly into the rack.
2. Check that the rubber stoppers are
firmly capped on the sample tube.
3. Insert the sample tube securely all the
way to the bottom of the rack.
0.25 MPa regulator
RISK OF INFECTION
In principle, all parts and surfaces of the
instrument must be regarded as infective.
(1)
(2)