SYSMEX XE-5000 - Page 56

CHAPTER 6 Operation
6-2 Sysmex XE-5000 Instructions for Use
Revised April 2007
Entering numbers and characters
Sample numbers or the like can be entered from the panel
keypad.
By pressing the NUM./ALPH. key on the panel keypad, you
can change the input mode in this order: “Numeric” →
“Uppercase Alphabet” → “Lowercase Alphabet”.
• Press the corresponding number keys to enter numbers.
• To enter characters, press the corresponding number key
repeatedly until the intended character appears.
• Press the C key to delete a character.
• Press the ENTER key to confirm input.