Attendant Features 200 FlexSet 120S/280S User Guide
System Features
[PubLib] Public Library is used to program or update the Public Speed Call telephone library.
To update/add/cancel a Public Speed Dial number:
1. Press [PubLib].
2. Choose [Lib#] and dial the library number, or scroll through the list of library numbers using
.
The Library number/name (e.g. PUBLIC LIB 6000) appears on the top line of the display. The
Library contents appear on the second line of the display.
3. Choose [Extrn#] and enter the digits you would normally dial to place the external call, including the
outside line access code. Possible outside line access codes: trunk number, trunk group number,
dial service, routing access or another public/personal library number and, for special purposes,
station/group numbers.
Special dial codes can be added to the outside dial number (see table on the next page),
NOTE: A new number programmed into an existing library number will erase the old number,
but will save the old library name.
OR
Choose [Cancel] to delete the Library contents.
CAUTION! When a library number is deleted, its name is also deleted. Names can only be
entered by an authorized technician or system manager.
4. Press [Exit] or
SPKR to terminate.
To Next Page
Loading...
