5.3 List of Menu Items
121
5
Control Panel
5.3.2 Maintenance
Use this to initialize the NV memory or adjust plain paper quality settings. You
can also make security settings to restrict access to certain menus.
Init NVM
Initialize the memory card's non-volatile memory.
The non-volatile memory stores configuration data, even when the printer is off.
This item cannot be set during printing.
●
Yes
Initialize the memory card's non-volatile memory. Initializing the NV memory restores all
the items of the control panel menus to their defaults.
You must restart the printer for this setting to take effect. After configuring items, be sure to
restart the printer.
●
No
Does not initialize the NV memory and returns to the menu.
Security
When necessary, you can set a password to limit access to menus. This helps
prevent items from being changed accidentally.
●
Panel Lock (default: No)
Select "Yes" to set a password.
●
Change Password
Set a four-digit password.
By default the password is "0000".
If you forget the password, select "Yes" in "Init NVM" in "2:Maintenance", and then press
the and and Set/Eject buttons simultaneously. This resets the password to the
default.
F/W Download
This allows the printer to either accept or reject new firmware.
To Next Page
Loading...
