Tally T8024 - Ipx Frame Type

5.3 List of Menu Items
125
5
Control Panel
●
IP Address
Use this to set the IP address.
aaa.bbb.ccc.ddd
Set aaa, bbb, ccc, and ddd between 0 and 255.
You cannot use the following:
224–225.xxx.xxx.xxx
127.xxx.xxx.xxx
●
The IP address cannot be set when DHCP is set in the "IP Address Setup". To set, set
the "IP Address Setup" to "Panel".
●
IP addresses are managed throughout the system as a whole. Specifying the wrong IP
address can affect the entire network. Before setting an IP address, consult your system
administrator.
●
Subnet Mask
Use this to set the subnet mask address.
aaa.bbb.ccc.ddd
Use 0,128, 192, 224, 240, 248, 252, 254, or 255 for aaa, bbb, ccc, and ddd.
●
Gateway Address
Use this to set the gateway address.
aaa.bbb.ccc.ddd
Set aaa, bbb, ccc, and ddd between 0 and 255.
You cannot use the following:
224-225.xxx.xxx.xxx
127.xxx.xxx.xxx
IPX Frame Type
Set a frame type when you use the printer in an IPX/SPX (NetWare)
environment.
This menu is only appears when an optional network expansion card is installed.
●
Auto (default)
Sets the frame type automatically.