Tally T8024 - Setting the Port

2.3 Configuring the TCP/IP Direct Print Utility
35
Installing the Printer Driver
2
2.3.2 Setting the Port
After you have created the printer icon in the previous section, configure the
TCP/IP Direct Print Utility port for the printer. The procedure is as follows:
Procedure
1
After starting up your computer, run Windows 98. Click Start, select
Settings and then Printers.
The Printers window is displayed.
2
The T8024 printer icon has been added by installation of the printer
driver. Select this added printer icon and click Properties from the File
menu.
The Properties dialog box is displayed.
3
Click Add Port in the Details tab.