F Precautions and Limitations
231
Appendix
When printing photo images
after printing a large volume of
data having the same image in
the same place, such as the
lines of a table, those images are
printed faintly in those places
where images of the previous
data existed.
If there are ghosts on the drum, the images from previous data may
also be printed.
Either print a different document or temporarily stop printing. Try
reprinting after allowing the printer to sit unused for a while.
Also, outputting several hundred pages of the same document can
place a load on the printer, which should be avoided.
When ghosts occur in the
characters and lines (particularly
when printing in environments
having low temperature and low
humidity).
Use at room temperature. In winter, allow the room to warm up
before printing.
If the problem persists, reprint with a color with which the ghost
image is not obvious.
Ruined printing when using
reduced printing
Depending on the document to print, characters and patterns may
be blotted with outputting with reduced printing.
Item Explanation
To Next Page
Loading...
