2.2 (Windows 95/Windows 98/Windows Me)
30
Installing the Printer Driver
2
For SMB environment
From the network list, search and select the printer. The printer will be displayed as
"host name-p" and will be under the host name icon. The factory default for the
workgroup name and host name is "Workgroup" and "TLnnnnnn" (nnnnnn: lower six
digits of the Ethernet address of the printer) respectively.
When you do not know the workgroup name and host name of the printer, either check
with the network administrator, or print out the Printer Settings list to confirm. Refer to
"8.4.1 Confirming Printer Configuration and Network Settings".
Click OK.
For NetWare environment
From the network list, search and select the printer. The print queue is displayed under
the NetWare file server icon.
When you do not know the print queue name, check with your network administrator.
Click OK.
5
When using the TCP/IP Direct Print Utility to print, proceed to the next
section "2.3 Configuring the TCP/IP Direct Print Utility"
If connected with a USB cable, move on to "2.5 Setting Up the USB
Port".
Once the correct connection has been selected in the printer driver
you should ask for a windows test page to be printed. This will confirm
that the driver and printer are working.
To Next Page
Loading...
