Technicolor TG670 User Manual

FIREWALL COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
505
firewall debug traceconfig
Display/Modify firewall trace configuration.
SYNTAX:
firewall debug traceconfig [tcpchecks = <{disabled|enabled}>]
[udpchecks = <{disabled|enabled}>]
[icmpchecks = <{disabled|enabled}>]
[sink = <{none|all|accept|deny|drop|reset} or
number>]
[forward = <{none|all|accept|deny|drop|reset}
or number>]
[source = <{none|all|accept|deny|drop|reset}
or number>]
where:
tcpchecks Disable/Enable tcpchecks traces. OPTIONAL
udpchecks Disable/Enable udpchecks traces. OPTIONAL
icmpchecks Disable/Enable icmpchecks traces. OPTIONAL
sink The action the firewall traces for sink traffic. OPTIONAL
forward The action the firewall traces for forward traffic. OPTIONAL
source The action the firewall traces for source traffic. OPTIONAL
nickdj.co.uk

Technicolor TG670 Specifications

General

Brand	Technicolor
Model	TG670
Category	Network Router
Language	English