IP COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
587
ip ipadd
Assign an IP address to an IP interface.
SYNTAX:
ip ipadd intf = <{loop|ipsec0|Internet|lan1|wan1|dmz1|
guest1}>
addr = <ip-address>
[netmask = <ip-mask(dotted or cidr)>]
[pointopoint = <ip-address>]
[addroute = <{disabled|enabled}>]
where:
intf The IP interface name. REQUIRED
addr The new IP address to add. REQUIRED
netmask The subnetmask associated with this address. OPTIONAL
pointopoint The remote address in case of a point-to-point link. OPTIONAL
addroute Add typical net/subnet routes automatically. OPTIONAL
To Next Page
Loading...
Need help?
General
