SNMP COMMANDS
1022
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
snmp view flush
Flush view families
SYNTAX:
snmp view flush [addr = <ip-address>]
[name = <string>]
[version = <number{1-4}>]
where:
addr IP address of NTP server to be added to list OPTIONAL
name DNS name of NTP server to be added to list. If both the IP
address and the DNS name are provided, the IP address is
ignored.
OPTIONAL
version SNTP version of server (1,2,3 or 4) OPTIONAL
To Next Page
Loading...
Need help?
General
