VOICE COMMANDS
1162
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
voice dialplan modify
Modify an entry in the dialplan
SYNTAX:
voice dialplan modify prefix = <{}>
newprefix = <string>
defaultport = <{FXS1|FXS2|FXO|VoIP|NA}>
fallbackport = <{FXS1|FXS2|FXO|VoIP|NA}>
priority = <{NA|Low|High}>
fallback = <{disabled|enabled}>
minimumdigits = <number{1-31}>
maximumdigits = <number{1-31}>
posofmodify = <number{0-31}>
remnumdigits = <number{0-31}>
[insert = <string>]
rescan = <{no|yes}>
data = <{no|yes}>
action = <{none|ROUTE_excl_eon|ROUTE_incl_eon|
ROUTE_excl_eon_PSO|ROUTE_incl_eon_PSO}>
where:
prefix The prefix REQUIRED
newprefix The prefix, identifies this entry REQUIRED
defaultport The default outgoing port REQUIRED
fallbackport The fallback outgoing port REQUIRED
priority The priority of the entry REQUIRED
fallback The fallback mechanism status of this entry REQUIRED
minimumdigits The minimum number of digits REQUIRED
maximumdigits The maximum number of digits REQUIRED
posofmodify Startposition at which a number of digits must be removed REQUIRED
remnumdigits The number of digits that need to be removed from the
complete number
REQUIRED
insert String which must be inserted at PosOfModify after
removing RemNumDigits
OPTIONAL
rescan Rescaning of the number needed or not REQUIRED
data This entry is used for data calls or not REQUIRED
action Action parameter REQUIRED