TLS COMMANDS
1102
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
tls remote-upgraded config
Display/modify tls settings
SYNTAX:
tls remote-upgraded config [state = <{disabled|enabled}>]
[auth-serv = <{disabled|enabled}>]
[valid-date = <{disabled|enabled}>]
where:
state SSL/TLS client for remote upgraded state OPTIONAL
auth-serv Request server authentication OPTIONAL
valid-date Check certificate validity date OPTIONAL
To Next Page
Loading...
Need help?
General
