SNMP COMMANDS
1024
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
snmp view modify
Modify a view family.
SYNTAX:
snmp view modify viewname = <{V1View|View_all|basic_readview|
WanAdmin_readview|extended_readview|
WanAdmin_writeview|extended_writeview}>
viewtree = <string>
[type = <{include|exclude}>]
[storage = <{other|volatile|nonVolatile|
permanent|readOnly}>]
where:
viewname Configure the name of this family of view subtrees. REQUIRED
viewtree Configure an object identifier that identifies a subtree of a
MIB.
REQUIRED
type Indicate whether the subtree is explicitely accessible or not
in this family of view subtrees.
OPTIONAL
storage Configure the storage type. OPTIONAL
To Next Page
Loading...
Need help?
General
