Technicolor TG670 User Manual

SNMP COMMANDS
998
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
snmp securitytogroup add
Add user to an access control group.
SYNTAX:
snmp securitytogroup add securitymodel = <{snmpv1|snmpv2c|usm}>
securityname = <{ROCommunity|SU|user|LanAdmin|
WanAdmin|PowerUser|TechAdmin|Administrator}>
groupname = <{SU_Group|V1ROGroup|V1RWGroup|
Basic_Group|Extended_Group|WanAdmin_Group}>
[storage = <{other|volatile|nonVolatile|
permanent|readOnly}>]
where:
securitymodel Configure a security model. REQUIRED
securityname Configure a name of a user. REQUIRED
groupname Configure the name of a group to which the user is
assigned.
REQUIRED
storage Configure the storage type. OPTIONAL
nickdj.co.uk

Technicolor TG670 Specifications

General

Brand	Technicolor
Model	TG670
Category	Network Router
Language	English