XDSL COMMANDS
1332
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
xdsl config
Modify/Display dsl configuration
SYNTAX:
xdsl config [adslmultimode = <{disable|adsl|adsl2|
adsl2plus}>]
[vdslmultimode = <{disable|vdsl2}>]
[detect-lop = <{disabled|enabled}>]
[syslog = <{disabled|enabled}>]
[status = <{down|up}>]
where:
adslmultimode Set/Show selected multimode type of the modem OPTIONAL
vdslmultimode Set/Show selected multimode type of the modem OPTIONAL
detect-lop Detect Loss Of Power OPTIONAL
syslog Log in syslog during showtime OPTIONAL
status configure adsl line up or down (setting can't be saved!) OPTIONAL
To Next Page
Loading...
Need help?
General
