VOICE COMMANDS
1150
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
voice config
Configure the general parameters
SYNTAX:
voice config [autofxo = <{disabled|enabled}>]
[digitrelay = <{auto|inband|rfc2833|
signalling|forcedsignalling}>]
[click2dial_ports = <{FXS1|FXS2|all}>]
[rtp_portrange = <string>]
[sign_internal = <{external|internal}>]
[goingonhookeffect = <{endallcalls|
endactivecall}>]
[static_intf = <{disabled|enabled}>]
[intf = <{loop|ipsec0|Internet|lan1|wan1|dmz1|
guest1|""}>]
[secondintf = <{loop|ipsec0|Internet|lan1|
wan1|dmz1|guest1|""}>]
[endofnumber = <{#|*|none}>]
[countrycode = <number>]
[delayeddisconnect = <{enabled|disabled}>]
[delayeddisconnectoverride = <{none|
INVITE_no_SDP}>]
[delayeddisconnecttimer = <number>]
[ringmuteduration = <number>]
[feature-mngt = <{internal|external}>]
[call-setup-failure-timeout = <number>]
[CCBS-invoked-timeout = <number>]
[nocallsetupmsg = <{never|unav-numb}>]
[syslogscope = <{none|all|only-stats|only-dm-
events|only-msgs|all}>]
[pstnsoftswitchover = <{enabled|disabled}>]
[no-answer-timer = <number>]
where:
autofxo Automatically make FXO calls when not registered OPTIONAL
digitrelay Set the digit relay mode OPTIONAL
click2dial_ports Set the click to dial port OPTIONAL
rtp_portrange The RTP port range <[startport]-[endport]> OPTIONAL
sign_internal Signalling for local calls is kept local or external OPTIONAL
goingonhookeffect Effect on Phones Going ONHOOK(EndActiveCall|
ENDALLCALLS)
OPTIONAL
static_intf Use a static (configured) interface to look for the IP address
or not
OPTIONAL
intf The name of a IP interface to be used for VOIP traffic,
NULL string to remove it.
OPTIONAL