DSD COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
269
dsd urlfilter config
Display/modify url filtering configuration
SYNTAX:
dsd urlfilter config [state = <{disabled|enabled}>]
[blockproxy = <{disabled|enabled}>]
[blockipaddress = <{disabled|enabled}>]
[blockobscuredip = <{disabled|enabled}>]
[defaultaction = <{block|accept}>]
where:
state Enable/disable url filtering OPTIONAL
blockproxy Block HTTP requests via a proxy server OPTIONAL
blockipaddress Block HTTP requests if host name is IP address OPTIONAL
blockobscuredip Block HTTP requests if host name is believed to be an IP
address
OPTIONAL
defaultaction Action to perform when no filter applicable. OPTIONAL