Technicolor TG670

SNMP COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
993
snmp notifyprofile add
Add notify filter profile entry.
SYNTAX:
snmp notifyprofile add paramname = <{V1Params}>
profilename = <>
[storage = <{other|volatile|nonVolatile|
permanent|readOnly}>]
where:
paramname Configure a name of a target Parameter defined in the
snmpTargetParamsTable.
REQUIRED
profilename Configure a name of a notify filter. REQUIRED
storage Configure the storage type. OPTIONAL
nickdj.co.uk