ETH COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
343
eth bridge config
Modify/Display the bridge configuration settings.
SYNTAX:
eth bridge config [brname = <{bridge}>]
[age = <number{10-1000000}>]
[mtu = <number{1500-1508}>]
[filter = <{none|no_WAN_broadcast}>]
[vlan = <{disabled|enabled}>]
where:
brname The name of a bridge instance. OPTIONAL
age The lifetime (in seconds) of a dynamically learned MAC
address.
OPTIONAL
mtu The MTU for this bridge. OPTIONAL
filter The bridge filter to be applied for all WAN bridge
interfaces.
OPTIONAL
vlan Enable/disable the use of the VLAN id of the received
VLAN packets.
OPTIONAL
To Next Page
Loading...
Need help?
General
