TUNNEL COMMANDS
1110
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
tunnel gre modify
configure a gre tunnel
SYNTAX:
tunnel gre modify ifname = <{>
source = <ip-address>
destination = <ip-address>
[key = <string>]
[checksum = <{disabled|enabled}>]
where:
ifname the name of the gre interface REQUIRED
source source address of outer ip header REQUIRED
destination destination address of outer ip header REQUIRED
key tunnel key OPTIONAL
checksum gre checksum option. OPTIONAL
To Next Page
Loading...
