EXPR COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
491
expr flush
Flush all expressions.
SYNTAX:
expr flush [state = <{disabled|enabled}>]
[keep = <{disabled|enabled}>]
[tcpchecks = <{none|fast|exact}>]
[udpchecks = <{disabled|enabled}>]
[icmpchecks = <{disabled|enabled}>]
[logdefault = <{disabled|enabled}>]
[logthreshold = <{disabled|enabled}>]
[tcpwindow = <number{0-1073725440}>]
where:
state Disable/Enable the firewall. OPTIONAL
keep Disable/Enable keeping existing connections when firewall
rules change.
OPTIONAL
tcpchecks Select level of TCP checks. OPTIONAL
udpchecks Disable/Enable UDP checks. OPTIONAL
icmpchecks Disable/Enable ICMP checks. OPTIONAL
logdefault Disable/Enable logging of default firewall rule. OPTIONAL
logthreshold Disable/Enable log thresholding. OPTIONAL
tcpwindow Modify the tcpwindow for fast TCP checks OPTIONAL
To Next Page
Loading...
Need help?
General
